Revealing the atomic structure of metallic glasses under high-velocity shocks using molecular simulation

Revealing the atomic structure of metallic glasses under high-velocity shocks using molecular simulation


Réf ABG-135676

Sujet de Thèse

13/02/2026

Contrat doctoral

Institut de Physique de Rennes - CNRS - Université de Rennes

Lieu de travail

Rennes - Bretagne - France

Intitulé du sujet

Revealing the atomic structure of metallic glasses under high-velocity shocks using molecular simulation

Champs scientifiques

* Matériaux
* Physique
* Sciences de l'ingénieur

Mots clés

metallic glasses, molecular simulation, shock mechanics, synchrotron experiments


Description du sujet


Context

Since their appearance in the 1960s [1], metallic glasses have been the subject of numerous studies highlighting mechanical properties that are often superior to those of their crystallised counterparts (yield strength, hardness and fracture resistance) [2-3]. Although the compositions of these amorphous alloys have expanded in terms of the elements present (Zr, Ti, Al, Cu, Ni, Fe, etc.), their industrialisation is currently limited to a few niche markets (luxury watchmaking and jewellery, cutting-edge medical applications, aeronautics, defence, and high-end leisure goods). In the field of shock and impact applications, the potential of metallic glasses is largely untapped, for example in golf clubs or the armouring of space structures against hypervelocity impacts [4]... with studies on their dynamic behaviour initiated in the early 2000s still in their infancy.

Scientific challenge

In the literature, studies have established the Hugoniot curve (location of shock-induced states) for certain compositions [5-9]. These data from the literature cover a limited range in terms of pressure (up to 120 GPa) and deformation rates (up to 5x105 s-1). The Rennes team is the only one to have studied the response of metallic glasses to stresses representative of a hypervelocity impact, thanks to the use of laser-generated shocks on three national facilities (GCLT at the CEA, HERA and LULI2000 at the LULI laboratory). We have thus achieved deformation speeds of 105 to 108 s-1 and pressures of 100 GPa (corresponding to an impact of a millimetre-sized object at 7 km.s-1) [10].

Below 100 GPa, the literature [7] suggests phase changes starting at certain shock pressures depending on the composition. The implementation of laser shock campaigns instrumented by in situ X-ray diffraction enabled us to identify the nature of the transition, namely crystallisation around 70 GPa for a Zr50Cu40Al10 metallic glass [11]. During loading, the shock pressure is then relaxed until tensile stress appears, which can cause spalling (dynamic fracture) of the target. Monitoring the evolution of the microstructure during the relaxation phase by molecular simulation will allow us to study: the origin of the high fracture limits [10], the mechanism of cone and cup formation [3] and the phenomenon of atomic segregation leading to an overconcentration of zirconium at the tip of the cone on the flake and its defect at the bottom of the cup on the rest of the target [12].

Approach and methods

The results already obtained on Zr50Cu40Al10 glasses at the macroscopic scale (change of state, plasticity, fracture) originate at the microscopic scale in the modification of the organisation and local composition of the material at the atomic scale. It is therefore also at this scale that the behaviour of different metallic glasses under laser shock must be studied. To analyse behaviour at this scale, we will use molecular dynamics simulations with the LAMMPS code. Once validated in our stress range, the EAM potentials from the literature [13-14] will enable us to account for the evolution of the atomic organisation of metallic glasses under dynamic stress (crystallisation under shock, deformation mechanism leading to the formation of cones and cups, atomic segregation). The potentials will first be used and tested by comparing the simulation results with the experimental results obtained during the EXAFS campaign on the ZrCu binary.

Beyond this project, the validated potentials can be used to explore the ZrCuAl glass family in order to find an optimal composition in terms of species concentration (mass proportion of each species) and initial atomic organisation (depending on the manufacturing process and any heat treatments) with a view to optimising the performance required for the application.

References

[1] P. Duwez, R.H. Willens, W. Klement, Journal of applied physics 31 (6), 1960. [2] M.F. Ashby, A.L. Greer, Scripta Materialia, 54 (3), 2006. [3] C.A. Schuh, T.C. Hufnagel, U. Ramamurty, Acta Materialia, 2007. [4] D.C. Hofmann, L. Hamill, E. Christiansen, S. Nutt, Advanced engineering materials 17 (9), 2015. [5] S.J. Turneaure, J.M. Winey, Y.M. Gupta, Applied Physics Letters 84, 2004.[6] T. Mashimo, H. Togo, Y. Zhang, Y. Uemura, T. Kinoshita, M. Kodama, Y. Kawamura, Applied Physics, Letter 89, 2006.[7] M. Martin, T. Sekine, T. Kobayashi, L. Kecskes, N.N. Thadhani, Metallurgical and Materials Transactions A 38, 2007.[8] H. Togo, Y. Zhang, Y. Kawamura, T. Mashimo, Materials Science and Engineering A 449, 2007.[9] B. Luo, G. Wang, F. Tan, J. Zhao; C. Liu, C. Sun, AIP ADVANCES 5, 067161, 2015.[10] Y. Raffray, B. Jodar, J. C. Sangleboeuf, A. Benuzzi-Mounaix, T. Vinci, L. Berthe, E. Lescoute, E. Barraud, E. Brambrink, R. Daudin, J. J. Blandin, D. Loison, International Journal of Impact Engineering, 181, 2023.[11]Y. Raffray, thèse de doctorat de l'université de Rennes, 2023.[12] B. Jodar, D. Loison, Y. Yokoyama, E. Lescoute, M. Nivard, L. Berthe, J.C. Sangleboeuf, Journal of Physics D: Applied Physics 51 (6), 2018.[13] Y. Q. Cheng, E. Ma, H. W. Sheng, Physical Review Letters 102, 2009.[14]P. Wen, B. Demaske, D.E. Spearot, S.R. Phillpot, Journal of Materials science 53, 2018.


Prise de fonction :


01/10/2026


Nature du financement


Contrat doctoral


Précisions sur le financement


Agence Nationale de la Rercherche


Présentation établissement et labo d'accueil


Institut de Physique de Rennes - CNRS - Université de Rennes

L'Institut de Physique de Rennes (IPR UMR 6251) est une Unité Mixte de Recherche qui a pour tutelles l'Université de Rennes et le CNRS.

Au CNRS, l'IPR est rattaché principalement au CNRS Physique et secondairement au CNRS Chimie et au CNRS Ingénierie.

Au sein de 5 bâtiments situés sur le campus de Beaulieu, les 6 départements de recherche mènent des activités scientifiques extrêmement variées et une grande partie des thématiques de la physique y est abordée.

Les travaux menés relèvent essentiellement de la recherche fondamentale sur des concepts émergents de la physique contemporaine et en réponse à des questions sociétales, avec une part de plus en plus importante d'activités qui se développent dans le cadre de partenariats industriels.

L'IPR développe des recherches fondamentale et appliquée au meilleur niveau international grâce à l'expertise des personnels techniques et administratifs. Une des forces majeures de l'IPR réside dans l'imbrication entre projets de recherche et développement de savoir-faire technique et technologique.


Site web :



Intitulé du doctorat


Doctorat de physique et science des matériaux


Pays d'obtention du doctorat


France


Etablissement délivrant le doctorat


Université de Rennes


Ecole doctorale


Matière, molécules, matériaux - 3M


Profil du candidat


Formation en physique ou en science des matériaux, avec des compétences en dynamique moléculaire.

Des compétences en physique statistique, mécanique de la rupture et en calcul scientifique serait un plus.

Date limite de candidature

15/05/2026